Tips On How To Drill Into Tile Without Causing Damage
There are many instances where drilling through tile is required. The key to having a successful job is to know how to drill holes in tile without cracking or damaging the tile resulting in cost overruns and time delays. The first and most obvious step is to carefully choose the right type of drill bit. Regular drill bits simply will not work on hard tile material. In most cases a carbide-tipped masonry drill bit or a diamond tip drill bit will be required.
The Drill Bit May Begin To Skip Around and Damage The Tile
These types of drill bits are specifically intended to cut through tile floors, rock and hard surfaces. They will reduce the chances of causing tile breakage or cracking. While these drill bits are somewhat more expensive than regular drill bits they will ultimately pay for themselves in the way of reduced damage. An additional important tip regards being able to cut through the hardened glazed outer surface of the tile without causing damage. When initially cutting into the glazed outer surface of tile the drill bit may begin to skip around and damage the tile. One way to avoid this problem is simply mark on the tile using masking tape.
This May Extend The Life Of The Drilling Bit
Begin by drilling directly into the tape resulting in added traction. Once the bid has begun cutting into the tile it is best to go slowly and drill in a steady and persistent fashion. Using low speed on the drill is recommended. Adding a constant trickle of water using a hose or some other similar method can reduce dust and reduce the temperature while drilling. This may extend the life of the drill bit and is worth considering. To learn more about how to drill tile and properly place ceramic tile flooring contact Timberline Discount Flooring in Houston.